UQA-E-XXX
The ConcentratIR2™ is a miniature multiple-reflection ATR accessory, compatible with the smaller FTIR sample compartments. Designed for micro-liquid samples, it features interchangeable diamond and silicon ATR sampli ... read more
The ConcentratIR2™ is a miniature multiple-reflection ATR accessory, compatible with the smaller FTIR sample compartments. Designed for micro-liquid samples, it features interchangeable diamond and silicon ATR sampling plates. Both ATR configurations consist of a thin disk of silicon or diamond that is optically contacted to a special ZnSe optic. The silicon configuration has eleven internal reflections with a nominal incident angle of 30° and is suitable for use from 4000 cm-1 to 650 cm-1. The diamond ATR has ten internal reflections with a nominal angle of incidence of 45° and has an approximate wavelength range from 4000 cm-1 to 550 cm-1; because of diamond lattice bands, the signal-to-noise ratio is limited in the vicinity of 2000 cm-1. Adjustments are provided to maximize performance and optical throughput. The ConcentratIR2™ is fully enclosed for rapid sample exchange with minimal interruption of the purge.
ConcentratIR2™ applications include infrared measurements of minute samples of liquids, pastes and slurries. It is ideal for forensic, proteomic and quantity control.
Download ConcentratIR2™ Data Sheet (pdf)
Download ConcentratIR2™ Application Notes:
The ConcentratIR2™ is a miniature multiple-reflection ATR accessory, compatible with the smaller FTIR sample compartments. Designed for micro-liquid samples, it features interchangeable diamond and...
Diamond ATR Sampling Plate for the ConcentratIR2
Si ATR Sampling Plate for the ConcentratIR2
Extended Si ATR Sampling Plate for the ConcentratIR2
ConcentratIR2 Liquid Cell with Luer Fittings For flow applications at ambient temperature, low volume cells are available with either Luer or Swagelok™ fittings. Our Luer and Swagelok™ heated flow...
Ambient temperature, low volume cell. Available with either Luer or Swagelok™ fittings. Also available for the ConcentratIR2 our Luer and Swagelok™ heated flow cells can be operated at ...
A heated trough for the ConcentratIR2 Multiple Reflection Acceessory with a maximum volume of 1.1 mL is available, for use with non-volatile samples. Several optional cells are available for use with...
Heatable Flow Cell for the ConcentratIR2, Luer Fittings Our Luer heated flow cells can be operated at temperatures up to 200 °C and have an internalvolume on the order of 26 microliters. Several...
Heatable Flow Cell for the ConcentratIR2, Swagelok Fittings Our Swagelok™ heated flow cells can be operated at temperatures up to 200 °C and have an internal volume on the order of 26...
User replaceable Heater Assembly for the ConcentratIR2 Multiple Reflection ATR Accessory.
