FiberMate2™ Fiber Optic Coupler
The FiberMate2™ links your FT-IR or UV-Vis spectrometer to fiber optic probes. Equipped with large ellipsoidal mirrors, the FiberMate2™ efficiently transmits the UV-Vis or FTIR beam of the...
DMP-PRB
The Diamond Probe is a fiber optic ATR accessory designed for analyzing a wide range of samples in the mid-infrared. Sample types include liquids, pastes, slurries, powders, and solids. Samples can be located up to 1.5 met ... read more
The Diamond Probe is a fiber optic ATR accessory designed for analyzing a wide range of samples in the mid-infrared. Sample types include liquids, pastes, slurries, powders, and solids. Samples can be located up to 1.5 meters from the spectrometer. The single reflection 45° diamond ATR element is Harrick’s crowned hemisphere, mechanically sealed in 316 stainless steel. The Probe has a diameter of 19 mm and an immersion depth of 125 mm. It is separately purgeable. An MCT detector-equipped FTIR spectrometer is required. The Probe is especially useful in monitoring liquid reactions. Temperatures up to 140 °C and pressures up to 0.55 MPa can be tolerated. Applications include fermentation, crystallization, and polymerization. The Diamond Probe requires that a fiber optic coupler, such as the Harrick FiberMate2™, be installed in the spectrometer. Also, the Probe and FiberMate2™ must be optically connected via two SMA terminated fiber optic cables such as those offered by Harrick.
Download Diamond Probe Data Sheet (pdf)
Download Diamond Probe Application Notes:
The FiberMate2™ links your FT-IR or UV-Vis spectrometer to fiber optic probes. Equipped with large ellipsoidal mirrors, the FiberMate2™ efficiently transmits the UV-Vis or FTIR beam of the...
The Omni-Spec™ is a 45° specular reflectance probe for sampling outside of the sample compartment. Designed to interface to virtually any spectrometer via fiber optics, this compact accessory comes...
The Omni-Diff™ diffuse reflectance probe interfaces to virtually any spectrometer via fiber optics. This compact accessory is equipped with input and output SMA connectors that readily attached to a...
This Temperature Controller is a full-featured tabletop controller designed for a variety of applications. It can be manually programmed to reach a desired temperature or computer controlled for...
Mid-IR Long Wavelength Fiber Set (PIR)
Cartridge Heater, 0.250" x 1.25", 24V/100W