The Diamond Probe is a fiber optic ATR accessory designed for analyzing a wide range of samples in the mid-infrared. Sample types include liquids, pastes, slurries, powders, and solids. Samples can be located up to 1.5 met ... read more
The Diamond Probe is a fiber optic ATR accessory designed for analyzing a wide range of samples in the mid-infrared. Sample types include liquids, pastes, slurries, powders, and solids. Samples can...
The Diamond Probe is a fiber optic ATR accessory designed for analyzing a wide range of samples in the mid-infrared. Sample types include liquids, pastes, slurries, powders, and solids. Samples can be located up to 1.5 meters from the spectrometer. The single reflection 45° diamond ATR element is Harrick’s crowned hemisphere, mechanically sealed in 316 stainless steel. The Probe has a diameter of 19 mm and an immersion depth of 125 mm. It is separately purgeable. An MCT detector-equipped FTIR spectrometer is required. The Probe is especially useful in monitoring liquid reactions. Temperatures up to 140 °C and pressures up to 0.55 MPa can be tolerated. Applications include fermentation, crystallization, and polymerization. The Diamond Probe requires that a fiber optic coupler, such as the Harrick FiberMate2™, be installed in the spectrometer. Also, the Probe and FiberMate2™ must be optically connected via two SMA terminated fiber optic cables such as those offered by Harrick.
Download Diamond Probe Data Sheet (pdf)
Download Diamond Probe Application Notes:
This Temperature Controller is a full-featured tabletop controller designed for a variety of applications. It can be manually programmed to reach a desired temperature or computer controlled for...
This Temperature Controller is a full-featured tabletop controller designed for a variety of applications. It can be manually programmed to reach a desired temperature or computer controlled for...
The FiberMate2™ links your FT-IR or UV-Vis spectrometer to fiber optic probes. Equipped with large ellipsoidal mirrors, the FiberMate2™ efficiently transmits the UV-Vis or FTIR beam of the...
The Omni-Diff™ diffuse reflectance probe interfaces to virtually any spectrometer via fiber optics. This compact accessory is equipped with input and output SMA connectors that readily attached to a...
The Omni-Spec™ is a 45° specular reflectance probe for sampling outside of the sample compartment. Designed to interface to virtually any spectrometer via fiber optics, this compact accessory comes...
Mid-IR Long Wavelength Fiber Set (PIR)
Cartridge Heater, 0.250" x 1.25", 24V/100W