Praying Mantis™ Diffuse Reflection Accessory

Additional Information

The Praying Mantis™ was the first generally available diffuse reflection accessory (DRA) and remains the forerunner in the field today. It is ideal for reliable diffuse reflectance studies of powders and other rough surface solid samples.



Figure 1. Interior View of the DRP.

The typical optical configuration of the Praying Mantis™ Diffuse Reflectance Attachments is shown in Fig. 1. The DRA incorporates two 6:1 90° off-axis ellipsoidal mirrors. One ellipsoid focuses the incident beam on the sample while the second collects the diffusely reflected radiation from the sample. Both ellipsoidal mirrors are tilted forward so the diffusely reflected radiation is collected at an azimuthal angle of 120°. This deflects the specularly reflected component behind the collection ellipsoid, minimizing the intensity of restrahlen bands caused by the specularly reflected light. Most other commercially available attachments collect the diffusely reflected light at 180°, where the restrahlen bands have maximum intensity. This optical geometry permits collection of up to 20% of all the diffusely reflected radiation, making the DRA quite practical for routine measurements.

The Praying Mantis™ can be used to examine powders and small solid samples. The sample is placed in one of the diffuse reflectance supplied sampling cups on the Praying Mantis™ sampling stage. The height of the stage can then be adjusted for optimal performance. The micrometer-style height adjust allows for accurate and reproducible positioning of the sample. For easy access to the sampling area, the Praying Mantis™ features the ability to flip its illumination and collection ellipsoids away from optical plane of the attachment.

The Praying Mantis™ also features PermaPurge™ and hence is enclosed in a purgeable box for rapid sample exchange with minimal interruption of the purge. This eliminates interference from water and carbon-dioxide bands in the infrared spectra.

The Praying Mantis™ is ideal for studying samples in a controlled environment and several optional environmental chambers are offered. Our Ambient Sample Chamber is designed for analysis of air-sensitive samples. The samples can be loaded in a glove box or similar enclosed environment. The chamber can then be sealed, removed from the glove box, and inserted in the Praying Mantis™ for for diffuse reflectance analysis. This Ambient Sample Chamber features a removable stainless steel dome with two KBr or UV quartz windows and a glass observation window.

Two additional reaction chamber models (see separate data sheet) are also available for use with the Praying Mantis™ diffuse reflectance accessory. These reaction chambers are designed for operation in static or flow conditions. Our Low Temperature Reaction Chamber is designed for operation up to 133 kPa (1 ktorr) and for temperatures ranging from -150°C to 600°C. Our High Temperature, Low Pressure Reaction Chamber operates at temperatures up to 910°C (under vacuum) and from pressures of 133 µPa (10^-6  torr) to 133 kPa (1 ktorr) . With its optional High Pressure Dome, this chamber can withstand pressures up to 3.44MPa (25.8 ktorr). This reaction chamber can be purchased as part of a kit including the Praying Mantis™ , Automatic Temperature Controller and comprehensive sampling tools (mortar and pestle, KBr powder, finger cots and spatula).

Representative DRIFTS spectra recorded with the Praying Mantis are shown here in Figures 2 and 3. Note that Figure 3 was recorded using the DRA with its HVC reaction chamber.



Figure 2. Diffuse Reflection of Chalk.



Figure 3. Diffuse Reflection of Wyodak Coal (A) after 24 hrs of oxidation at 2.4KPa at 393°C, (B) dried unoxidized samples and (C) the difference spectrum (A-B).